peculiarity
• Operation design: Equipped with a two-foot switch that requires both feet to operate at the same time to start the shear machine, which can ensure that the operator’s hands are away from the dangerous area and improve the safety of operation. At the same time with an emergency stop rod, in the event of an emergency, the operator can quickly step on or press the emergency stop rod, so that the equipment stops running immediately, to avoid the occurrence of accidents.
• Anti-slip design: anti-slip aluminum is generally used in the operation of pedals and other parts to increase friction, prevent the operator from misoperating or falling due to foot slip during operation, and improve the stability and safety of operation.
• Anti-bending function: Special measures may be taken in the structural design or material selection, so that the shear machine can withstand greater pressure and shear force during the working process, and is not easy to bend and deform, ensuring the accuracy and service life of the equipment, and also helping to improve the shear quality.
Apply
• Metal processing industry: can be used to cut a variety of metal sheet, wire, etc., such as aluminum sheet, steel sheet, etc. according to the required size and shape of cutting, for the subsequent processing process to provide blanks.
• Automobile manufacturing industry: In the production of automobile parts, it is used to cut automobile body panels, frame materials, etc., to ensure the dimensional accuracy and quality of parts.
• Electronic and electrical industry: cutting the pins of electronic components, or cutting the shell materials of some electronic devices.
Operation precautions
• Before operation: Check whether the appearance of the equipment is damaged, whether the operating components such as the two-foot switch and the emergency stop rod are sensitive and reliable, and whether there is debris or wear on the non-slip aluminum surface. At the same time, ensure that the power connection of the shearing machine is normal and the electrical system is fault-free.
• During operation: both feet must be used to operate the switch at the same time, and it is strictly prohibited to operate with one foot or other items instead of two feet. During the cutting process, it is necessary to maintain attention and observe the shear of the material to ensure the quality of the cutting. If the device is found to be running abnormally or abnormal, step on the emergency stop lever immediately to stop the operation of the device and check it.
• After operation: turn off the power of the equipment, clean up the debris and waste around the equipment, and clean the surface of the non-slip aluminum to prevent the accumulation of debris from affecting the anti-slip effect. Maintain the equipment regularly, check the wear of each component, and replace the severely worn parts in time.
Web:www.cnswitch.cn;
Tel/Fax: 0086-577-62840011
WhatsApp: 008613355775769
